Main menu

Pages

Hot News

How to remove rust from your car shell without spending extra money?

How to remove rust from your car shell without spending extra money

How to remove rust from your car shell without spending extra money

Rust caused by the sun, humidity, and various factors, can be the worst enemy for the body of the cars , however, it does not have to become a major problem if you attend it on time.

It should be noted that, if the rust in a car is very advanced, it is best to take your car to a professional , as it may even require panel welding.

According to the portal The Drive , combating corrosion that is just beginning to form is something you can do on your own, however, you must take certain precautionary measures, as it is dangerous to work with materials such as inhalable solvents, bare metal, pieces paint and rust fragments, which can come off, be transported in the air and cause damage to the eyes, so we suggest you use the following objects for your safety.

SAFETY EQUIPMENT:

  • Mechanical gloves to protect your hands
  • Long sleeve shirt to protect your arms.
  • A respirator to prevent inhalation of harmful fumes and particles.
  • Transparent goggles to protect your eyes.

TOOLS:

As in all work, you will require tools to remove rust from your car, and here we share the list of what you need to have on hand to perform the task.
  • Sander
  • A hand scraper
  • Polisher
  • Painter's tape
  • Sandpaper in a selection of grits (i.e. 40, 320 and 1000)
  • Various microfiber cloths
  • Preparation solvent
  • Primer (epoxy and lacquer)
  • Paint the color of your car
  • Clean coat
  • Polish and wax

PROCESS:

1. Wash the area well, removing dirt and grime from the path.

2. Dry the area well to avoid any moisture remaining.

3. Use painter's tape to mark the section of rust you want to remove.

4. Use a hand scraper to remove any paint chips or blisters to get to the rust underneath.

5. Using 40-grit sandpaper or the abrasive wheel, sand the area down to bare metal.

6. Feather the edges of the painting with 120-grit sandpaper and finish with 220-grit for maximum smoothness.

7. Clean the area with a damp microfiber cloth.

8. Dry with a separate, dry microfiber cloth.

9. Apply make-up solvent as recommended by the paint manufacturer.

10. Apply epoxy primer as directed and allow to dry.

11. Sand with wet 1000-grit sandpaper.

12. Wash the area with clean water and let it dry.

13. Apply lacquer primer as directed and allow to dry.

14. Sand with 320-grit sandpaper.

15. Apply paint as directed.

16. Apply clear coat as directed and allow to dry.

17. Sand wet with increasingly high-grit sandpaper as directed.

18. Apply polishing compound using a polishing pad (or buffer), as directed.

19. Apply wax to finish and voila

Your car will be restored from rust and you can live more peacefully knowing that you do not have corrosion that could progress.

YOU MAY LIKE:


reactions

Comments